Reflectors/Reflective Film » Reflector Accessories

Finally, a safe and very efficient way to water-cool your entire grow room! It consists of a high-quality heat-exchanger with a strong molded plastic housing. One side of the housing is designed to install over a 6" or 8" air-cooled reflector duct flange, and as an option the opposite side can be attached to 6" or 8" air ducting (depending on inline fan placement). Air from your indoor garden is either pushed or pulled through the reflectors with an inline fan and then passed over the Ice Box heat exchanger. Cold water is circulated through the heat exchanger, cooling the air before it exits right back into the indoor garden area. The longer the tubing the higher the pump. But you don’t want to use too high of a pump, due to the fact that it may not allow adequate time for the water to chill. If humidity is an issue in your room, you may want to put the reservoir outside the room.

• ¼ HP minimum chiller size is recommended per 1000 watts.
• 600gph-900gph pump needed depending on the length and size of the tubing.
• Approximately 250 cfm of airflow is needed to properly cool the fixture.
• Several units can be daisy chained together using one fan, only 250 cfm is needed though all fixtures.
• For maximum efficiency we recommend one Ice Box per reflector.
• Allows you to keep a sealed room and helps keep pest and pathogens out of the room.
• Keeps CO2 in the room instead of exhausting it out.
• By running the water approximately 20 degree colder than your environment it can reduce the cooling load or replace your a/c unit.
• Can be wall mounted with optional wall mount kit that includes the bracket and ducting coupler.

The reflector heat shield is a sturdy, custom-fitted cover that double-insulates your existing air-cooled hood against the heat your lights generate. With the reflector heat shield, less heat escapes into your room and is instead contained within your hood to be better carried away by your existing air-cooling. This results in a cooler environment, happier plants, and energy savings in the form of increased A/C efficiency.

• IR blocking and heavy duty wool insulating material custom fit to your favorie Sunlight Supply® reflectors
• Reduce your grow room temperature
• Maximizes efficiency of your air-cooling by containing heat
• Quiets roaring air inside the reflector
• soft, durable and machine washable
• Strong two piece construction consisting of a high quality insulating wool liner and radiant barrier fabric
• 95% reflective
• Professionally made in the USA

The ALL NEW Super-Spreader® combines common sense and innovation with advancements in effective surface technology to produce a truly Super Light Spreader! The new design is attractive, lightweight and easy to install. The 'Spreader Heads' are made from 97% reflective glass-coated aluminum with a prismatic micro-textured surface.

This incredible alloy is super cool, very reflective and creates even light distribution. The prismatic surface reflects and redirects light in a selective 4-way pattern for incredible results!

How & Why They Work! The design of the Super Spreader® is based on logic and simplicity. All horizontal reflectors create an over hot, over bright spot directly beneath the lamp. The Super-Spreader® spreads the excess light and heat proportionally to all areas of the grow room (especially the corners and edges which are often underlit). This creates even light and more harmonious growing conditions throughout the entire grow room.

NOTE: By attaching the Super-Spreader® accessory, the Adjust-A-Wings® performance may be enhanced significantly.

Adjust-A-Wings® fited with Super-Spreader® can be lowered to an unprecendented 10"-12" from growing plants to produce awesome growing power while maintaining maximum area coverage and minimum heat build-up. Yield increases of up to 50% are not uncommon with proper use of this truly outstanding product.

• Use these brackets to attach T5 Strip Lights to Sun System® Reflectors.
• They attach to steel reflectors with powerful magnets.
• Add blue light from the 6500K T5's to your HPS lamp to offer plants a full spectrum of light.
• Brackets attach to Strip Lights with easy to use thumb bolts.
• Use with 2' or 4' T5 Strip Lights.

• Simply slide this unique product over a mogul base socket on most horizontal burning reflectors to filter and disperse the intense “hot spot” of light directly under an HID lamp.
• With the hot spot diffused, you can hang reflectors closer to the plant canopy while reducing the risk of burning the plants directly under the lamp.
• The revolutionary shape, size and hole patterns were designed using the latest lighting development software.
• The Equalizer™ will aid in improving the uniformity of your fixture by reducing the hot spot below the lamp.
• Made of 95% reflective German aluminum.
• Patent Pending.

Fixtures that will accept the Equalizer™: Cool Sun, Cool Sun XL, Super Sun 2, Yield Master 6”, Great White, Magnum XXXL 6”, Magnum XXXL 8”, Large Convertible, Yield Master 4”, Agrotech, Agrotech - Magnum, Vertizontal, Silver Sun, Econowing and Lumen Max.