|
|
|
|---|
 Precision electronic control for all environmental variables. Outlets for lighting, irrigation, ventilation, and CO2. High accuracy sensors for temperature, humidity, and flood. Optional Photocell (light) and CO2 sensors available. Sensors have flexible 10 ft. cables (25 ft. total with optional extensions). This allows the Plant Pro to be located for easy monitoring and adjustment, even outside the grow room, if desired. The Plant Pro unique simplified operation allows for easy, quick setup using only two control knobs and a large digital display. One knob to select a setting, a display to show the setting, and a second knob to change the setting. Measurements from sensors can also be displayed. Easy to use digital clock provides exact timing. CO2 control includes timed or optional CO2 sensor. Adjustable fan CO2 delay allows extra time for CO2 absorption by plants before ventilation fan comes on.
*Special Order items may take longer to process | | Item # | Description | Price | Add to Cart |
|---|
| 703612 | Solatel Extension Cable Set (set of 4) | $38.95 | Add to Cart | | 703610 | PLANT PRO CONTROLLER (SYSTEM 2) W/ CO2 | $1045.00 |  | | 703609 | PLANT PRO PHOTOCELL SENSOR - special order | $39.95 | Add to Cart | | 703607 | SOLATEL TEMPERATURE SENSOR( TMP-1) - special order | $48.95 | Add to Cart | | 703606 | SOLATEL CO2 SENSOR FOR PLANT PRO - special order | $505.95 | |
|
|
|---|
 The Solatel THP 100 coordiantes ventilation and CO2 (carbon dioxide). This is required when temperature and humidity are controlled by a vent or exhaust fan. Hot or humid air is blown out of the growing area and fresh air is then drawn in. This continues until both temprature and humidity fall below the dial settings. CO2 is only dispensed during the day when plants have light for photosynthesis. It is not dispensed when the fan is operating because this would waste CO2. The THP 100 provides all of these functions. When connecting CO2 equipment, a repeat cycle timer or CO2 concentration controller (not included) is plugged into the THP 100. The CO2 tank valve or CO2 generator then plugs into the timer or controller. | | Item # | Description | Price | Add to Cart |
|---|
| 703613 | THP-100 ATMOSPHERIC CONTROLLER | $266.95 | |
|
|
|---|
 Simply set the desired CO2 level and the CO2-300 does the rest. The Sensor Unit has a display and 3 buttons (SET, +, and -). Normally it displays actual room CO2 PPM (Parts Per Million). Using the buttons, you can display and change the set point (also in PPM). The Sensor Unit is connected to the Control Unit by an 8 foot cable. The Control Unit plugs into any 120V outlet. If you wish to defeat CO2 dispensing when your lamp is off, plug the Control Unit into your lamp timer or a timer running the same schedule. The CO2 dispensing equipment (tank solenoid valve or generator) plugs into the 120V outlet on the front of the Control Unit.
*Special order items may take longer to process
| | Item # | Description | Price | Add to Cart |
|---|
| 703614 | SOLATEL CO2 300 (SPECIAL ORDER) | $617.95 | |
|
|
|---|
 Power Expanders allow you to turn on more high powered loads (such as horticultural fixtures) from a timer or environmental controller. Usually the electrical outlet for your timer or controller can only service a single 1000 watt fixture without tripping the circuit breaker. By utilizing other outlets (on separate circuit breakers) more fixtures can be added and still be controlled by your timer. These Power Expanders have ready to go outlets (120V or 240V depending on model), a 10ft trigger cord (that sends a low power turn-on signal from the timer or controller) and a power cord that plugs into the outlet on the separate circuit breaker. Multiple Power Expanders can be used to control a large number of devices. | | Item # | Description | Price | Add to Cart |
|---|
| 703615 | POWER EXPANDER 120V (PWX-1) | $106.95 | Add to Cart |
|
|
|---|
PWX-240-4 Power Expander lets you control up to four 1000 watt 240 volt lighting systems. Comes pre-wired with 12 guage 6' power cable and a 6' trigger cord with a 120v plug. The power cable connects to a 240V 20A service. The trigger cord can be connected to any 24 hour timer/controller. The trigger cord turns four outlets on at once.
PWX-240-U Power Expander lets you control up to four 1000 watt 240 volt lighting systems. Comes pre-wired with a 10 guage 6' power cable and a 6' trigger cord with 120V plug. The power cable connects toa 240V 30A service. The grigger cord can be connected to any 24 hour timer/controller. The trigger cord turns on all four 240V outlets at once. PLUS: two 120 volt outlets that are always on with an added 10 amps each. The trigger cord has no effect on the 120V outlets.
| | Item # | Description | Price | Add to Cart |
|---|
| 703617 | PWX-240-4 POWER EXPANDER 4 OUTLET | $237.95 | | | 703618 | PWX-240-U POWER EXPANDER 6 OUTLET COMBO | $256.95 | |
|
|
|---|
PWX-240-6 Power Expander lets you control up to six 1000 watt 240 volt lighting systems. Comes Pre-wired w/10 gauge 6’ power cable and a 6’ trigger cord with a 120 volt plug. The power cable connects to a 240V 30A service. The trigger cord can be connected to any 24 hour timer/controller. The Trigger cord turns all six outlets on at once.
The PWX240S (not shown) is similar to the PWX240-6 except that it sequences the outlet pairs on. The first outlet pair turns on immediately and the final 2 outlet pairs turn on 20 seconds apart. This helps avoid circuit breakers popping.
| | Item # | Description | Price | Add to Cart |
|---|
| 703620 | POWER EXPANDER 240V (PWX-240-6) | $256.95 | | | 703621 | PWX-240S POWER EXPANDER(20 SEC. DELAY) | $306.95 | |
|
|
|---|
 These easy to use timers have a single select knob that clicks to any of 16 time settings. Settings include an accelerated 18 hour day cycle running ON 6 hours / OFF 12 hours. Thirteen normal 24 hour day settings cover ON 8 / OFF 16 to ON 20 / OFF 4 in one hour increments. Continuously ON and OFF settings are also included. The Lamp Pro sequences two outlets on, 20 seconds later the next two, and 20 seconds later the final two. This reduces electrical problems. Turn off has a 5 second delay. The LP-120S (120V 15A) uses standard 120V type outlets and power cord plug. | | Item # | Description | Price | Add to Cart |
|---|
| 703625 | LAMP PRO TIMER 120V (LP120S) | $287.95 | |
|
|
|---|
 Detects overflow of water or nutrient if pipe breaks or drains clog. Two 120V 15A outlets: one ON when sensor wet, other ON when dry. Flood can turn on alarm or turn off water supply. Two second response time. Sensor has 10 ft. cable. Hold Switch selects automatic or manual reset when wet sensor dries out | | Item # | Description | Price | Add to Cart |
|---|
| 703611 | Flood Detector (Stand Alone) | $155.00 | Add to Cart |
|
|
|---|
 These easy to use timers have a single select knob that clicks to any of 16 time settings. Settings include an accelerated 18 hour day cycle running ON 6 hours / OFF 12 hours. Thirteen normal 24 hour day settings cover ON 8 / OFF 16 to ON 20 / OFF 4 in one hour increments. Continuously ON and OFF settings are also included. The Lamp Pro sequences two outlets on, 20 seconds later the next two, and 20 seconds later the final two. This reduces electrical problems. Turn off has a 5 second delay. The LP-240S (240V 30A) has 240V outlets and an 8 foot power cord with unterminated wires. It can control up to six 1000 watt fixtures. | | Item # | Description | Price | Add to Cart |
|---|
| 703630 | LAMP PRO TIMER 240V (LP240S) | $327.95 | |
|
|
|
Smart Pots |
|---|
SMART POTS - NEW ITEM!
By taking advantage of the benefits of traditional plas... |
|
Read more »»»
|
|
Gardening Indoors with So... |
|---|
This fifth edition of Gardening Indo... |
|
Read more »»»
|
|
