Environmental Controllers » HydroGen

Calibrated and maintenance free, the HydroGen CO2 Monitor utilizes top quality SenseAir® brand CO2 detection technology. This monitor will work with any CO2 generator or bottle regulator. It is simply all you need to regulate CO2 in your garden.

• Programmed to turn on at 1300 ppm and off at 1500 ppm.
• Easy to read indicator lights show CO2 levels.
• Installs easily with our wall mount bracket.
• 120 Volt switched piggyback cord.
• “Just the basics” approach makes this unit very affordable.

The HydroGen is the world’s first and only water cooled CO2 generator. Water cooling is capable of removing 86% of the heat produced by burning propane and has loads of other options and features not available in any other CO2 generator on the market, including a completely adjustable flame (can produce anywhere between 15 and 45 cubic feet of CO2 per hr), an adjustable water flow valve, no pilot light (flame is activated by water flow), a tip over cut off, an overheat shut down sensor, and the list goes on. The unit can easily be used in a closed-loop system with a small chiller and reservoir, or you can connect directly to your home water supply and drain to storage for reuse in your garden. The unit is compact in size and can be either hung or wall-mounted anywhere in your garden.

This optional valve (used in place of a pump) is designed to be installed in a pressurized water line and to be controlled by your CO2 monitor. This is a high quality solid brass valve designed for years of service. The valve has 1/2” NPT outlets that can be used to attach the valve inline with your existing plumbing or you can install on ½” hose barbs to make the connection. You will need either a pump or a valve but not both. 1 Year Warranty.